Cdp Bt Serial Number 3555
Cdp Bt Serial Number 3555: A Guide to Updating and Using Autocom CDP Software
If you have an old Autocom CDP+ interface with the serial number 3555, you might be wondering how to update it and use it with the latest Autocom software versions. In this article, we will explain how to find your serial number, how to update your firmware, and how to troubleshoot some common issues.
Download: https://t.co/gKEPduUwQd
How to Find Your Cdp Bt Serial Number 3555
One of the easiest ways to find the Cdp Bt serial number 3555 on your device is to check the label on the back or bottom of the device. The label usually contains information such as the model name, product code, and serial number. The serial number is usually a 12-digit alphanumeric code that starts with "CDP-BT".
Another way to find the Cdp Bt serial number 3555 on your device is to scan the QR code on the label using your smartphone or tablet. The QR code is a square-shaped barcode that contains information such as the serial number and other details about your device.
How to Update Your Firmware
To update your firmware, you will need to download and install the latest Autocom software version from the official website. The latest version as of September 2023 is 2017 R3. You will also need a USB cable to connect your device to your computer.
Once you have installed the software, follow these steps:
Launch the Autocom software and select "Settings".
Select "Hardware setup" and click on "Test" to check if your device is recognized.
If your device is recognized, click on "Update firmware" and follow the instructions on the screen.
If your device is not recognized, try changing the serial number in the software settings to 30250 or 20418. These are alternative serial numbers that might work with your device.
If changing the serial number does not help, try using a different USB cable or port, or reinstalling the software.
How to Troubleshoot Common Issues
Some of the common issues that you might encounter when using your device are:
The device does not connect to the vehicle or shows communication errors.
The device does not perform all functions or shows incorrect data.
The device freezes or crashes during operation.
To troubleshoot these issues, you can try the following solutions:
Check if your vehicle is compatible with your device and software version. You can find a list of supported vehicles on the official website.
Check if your vehicle battery is fully charged and connected properly.
Check if your device firmware and software are up to date.
Check if your device settings are correct for your vehicle type and protocol.
Check if your device cables and connectors are clean and undamaged.
Restart your device and software and try again.
Conclusion
In this article, we have shown you how to find your Cdp Bt serial number 3555, how to update your firmware, and how to troubleshoot some common issues. We hope this guide has been helpful for you and that you can enjoy using your Autocom CDP+ interface with the latest software versions. If you have any questions or feedback, please feel free to contact us or leave a comment below.
References
[old Autocom CDP+ interface with autocom v 2017 r1 or r3 not recognized]
[Cdp Bt Serial Number 3555: A Guide to Updating and Using Autocom CDP Software]